Greifer Lifting electromagnet Lifting beams Guard magnet Control units Grab Backup power source Isolating transformers
Greifer Lifting electromagnet Lifting beams Guard magnet Control units Grab Backup power source Isolating transformers

DKMs series lifting electromagnets are European analogs

Серия ДКМс - аналоги европейских электромагнитов

DKMs series lifting electromagnets are intended to lift scrap, slabs, metal sheets. These electromagnets are closer analogs to European electromagnets.

Model А, мм Dead weight, t P, kW* Breakaway force, t** Lifting capacity, t***
on plate pig iron iron scrap on scrap chip scrap
DKMs100/А 1000 0,83 4.8 20 10,0 0,48 420 370 190
DKMs115/А 1150 1,1 5,5 26 13,0 0,66 530 490 260
DKMs125S/А 1250 1,4 8,8 29 14,5 0,85 650 580 340
DKMs130L/А 1300 1,2 10,5 25 12,5 0,8 650 600 360
DKMs135S/А 1350 1,9 10 32 16,0 0,98 790 710 390
DKMs135Т/А 1350 2,3 12 40 20,0 1110 1060 1010 510
DKMs135SТ/А 1350 3,4 15 53 26,5 1,5 1450 1390 670
DKMs150L/А 1500 2,0 12,2 36 18,0 1,0 800 750 450
DKMs150С/А 1500 2,5 11,7 42 21,0 1,34 1150 980 530
DKMs150Т/А 1500 3,5 16 52 26,0 1,54 1480 1400 690
DKMs150SТ/А 1500 5,0 20 70 35,0  2,2 2150 2050 940
DKMs170L/А 1700 2,5 17 45 22,5 1,35 1100 1000 600
DKMs170S/А 1700 3,4 17,8 62 31,0 1,98 1570 1470 770
DKMs170Т/А 1700 5,0 22 70 35,0 2,35 2080 1950 970
DKMs170SТ/А 1700 6,2 24 90 45,0 3,0 2950 2830 1300
DKMs185SТ/А 1850 8,5 26 110 55,0 3,7 3650 3500 1570
DKMs190L/А 1900 5,2 22 75 37,5 2,6 2100 2080 920
DKMs200Т/А 2000 7,5 27 110 55,0 3,3 3050 2900 1450
DKMs200SТ/А 2000 10,0 30 135 67,5 4,5 4100 3940 1750
DKMs220S/А 2200 7,0 30,5 85 42,5 3,4 3080 3000 1500
DKMs220Т/А 2200 10,0 36 130 65,0 4,33 4100 3750 1950
DKMs220SТ/А 2200 14,0 34 170 85,0 5,5 4800 4600 2020
DKMs250Т/А 2500 13,0 48 155 77,5 5,16 4850 4570 2320
DKMs300Т/А 3050 15,0 59 200 100,0 7,03 6650 6280 3160

* Cold electromagnet (for electrical equipment connection).
** The breakaway force is measured on a firm plate with air-gap 1/300 of electromagnet's diameter.
*** The above-mentioned lifting capacity values are in accordance with average values and can be different (more or less) at operation, it depends on a lifted cargo, its form, alloy composition, storage conditions, operator.
The CY duty cycle is 75% / 10 minutes.